Clean installs, tight seams, long service life. TPO, EPDM & PVC

TPO, EPDM & PVC Smarter flat roofs start here

Marlin Construction installs and repairs TPO, EPDM, and PVC roofing in Houston for commercial buildings, HOAs, and light industrial sites. If you manage a flat or low-slope roof, this page explains your options, cost drivers, and our process so you can choose with confidence.

Call (713) 444-5202 to schedule a free roof assessment.

Why Houston Property Owners Choose Single-Ply (TPO, EPDM & PVC)

Built for Gulf Coast weather

Houston heat, UV, sudden downpours, and coastal winds demand a tough membrane. TPO, EPDM, and PVC deliver reflective surfaces, flexible seams, and reliable waterproofing.

Energy savings that show up on bills

Cool-roof membranes (especially white TPO and PVC) reflect sunlight, reducing cooling loads and helping stabilize interior temperatures.

Faster installs, fewer disruptions

Single-ply systems install efficiently over approved decks or recover boards. That keeps tenants happy and downtime low.

Proven life cycles

With the right detail work and maintenance, single-ply roofs routinely deliver 20–30 years of performance.

Which Membrane Is Right for Your Roof?

TPO (Thermoplastic Polyolefin)

• Best for: Owners prioritizing energy efficiency and value
• Strengths: Highly reflective white surface, heat-welded seams, mold and algae resistance
• Use cases: Retail strips, medical offices, warehouses, schools

EPDM (Ethylene Propylene Diene Monomer)

• Best for: Durability and flexibility across large footprints
• Strengths: Black membrane absorbs winter warmth, excellent hail and puncture resistance, forgiving over movement
• Use cases: Distribution centers, older buildings with movement, expansive roof decks

PVC (Polyvinyl Chloride)

• Best for: Grease-exposed roofs and complex detail work
• Strengths: Superior chemical resistance, strong heat-welded seams, excellent ponding-water tolerance
• Use cases: Restaurants, manufacturing, labs, mixed-use with vent stacks

Not sure? We’ll evaluate slope, drainage, insulation, penetrations, energy goals, and budget—then give you a side-by-side TPO vs. EPDM vs. PVC comparison.

Call (713) 444-5202 to request your options report.

Our Proven Process

1) Roof Assessment & Moisture Scan

We document seams, flashing, ponding areas, and penetrations. When needed, we perform core cuts or infrared/moisture scans.

2) Scope & Options

You receive a clear scope—repair, recover, or full replacement—with TPO, EPDM, and PVC pricing, insulation R-value choices, and warranty paths.

3) Permits & Staging

We handle permits, safety plans, deliveries, and tenant notices to keep your site operating smoothly.

4) Substrate Prep

We correct deck issues, add tapered insulation for drainage, and install cover boards for impact resistance.

5) Membrane Installation

Factory-approved crews heat-weld TPO/PVC seams or seam-tape EPDM, flash all penetrations, and set edge metal per FM/NRCA guidelines.

6) Quality Control & Warranty

We complete punch lists, pull test results, and close out with manufacturer warranty registration and maintenance schedule.

What You Gain with Marlin Construction

• Manufacturer-approved install crews for TPO, EPDM, and PVC systems
• Houston-specific detailing for ponding, hurricane edges, and thermal movement
• Top-tier warranties (labor & material options)
• Owner-friendly reporting: photos, drawings, and maintenance plans
• Minimal disruption to tenants and operations

Frequently Asked Questions (TPO, EPDM & PVC)

1) How long do these roofs last in Houston?
With proper design and maintenance, 20–30 years is typical. UV exposure, foot traffic, and drainage affect lifespan.

2) Can I recover my existing roof instead of tearing it off?
Often, yes—if the substrate is dry and the code allows a recovery. We test for moisture and confirm local code compliance.

3) Which membrane is “coolest” for energy savings?
White TPO and PVC are highly reflective and often yield the best cooling benefits. Black EPDM may suit winter-dominant climates or specific performance needs.

4) What thickness should I choose (45, 60, 80 mil)?
Thicker membranes boost puncture resistance and longevity. We match thickness to traffic levels, hail risk, and warranty goals.

5) Do you handle roof drains and ponding areas?
Yes. We add tapered insulation, rework drains/scuppers, and tighten edge details to move water off the roof quickly.

6) Are heat-welded seams better than taped seams?
Heat-welded seams (TPO/PVC) deliver excellent long-term strength. EPDM’s taped seams also perform well when installed correctly. The right choice depends on your building.

7) How disruptive is a replacement?
We stage work zones, coordinate with tenants, and work off-hours when needed. Most operations continue with minimal impact.

8) What about rooftop grease at restaurants?
Choose PVC. It resists fats, oils, and chemicals better than TPO or EPDM.

Service Areas

We provide TPO, EPDM & PVC roofing in Houston and surrounding communities: Downtown, Midtown, Galleria, Memorial, Spring, The Woodlands, Sugar Land, Katy, Cypress, Pearland, Pasadena, Baytown, League City, Humble, Kingwood, Tomball, Conroe, Missouri City, and more across Harris, Fort Bend, Montgomery, and Galveston counties.

Ready to Compare Your Options?

Call Marlin Construction at (713) 444-5202 to book a free assessment, or ask for a same-day roof check.